How much a windowsill costs: what the price consists of and how to save

The question we are asked most often is “How much does a windowsill cost?”. And the most common answer is “It depends on the width, the length and what you add to it”. So that you do not have to guess, we have calculated three typical windows from the current price list and put together an estimate for a whole flat. For beginners we explain what the price consists of, and for site managers and designers we leave a ready estimate scheme.

from 909UAH per metre: the narrowest sill
1 pairof end caps for each sill
from 600UAH per metre: measuring and turnkey installation
4 minread · updated 18.10.2026

What the price consists of

  • Width. The price of a metre grows in steps: the wider the sill, the dearer the metre. So an extra 50 mm of width noticeably raises the total.
  • Length. The sill is cut to size and cutting is included in the price per metre: you pay only for the length you need.
  • Series. Exclusive and Compact cost the same according to the table, Wermodin Gentas is cheaper.
  • End caps. A pair costs 226 UAH. One pair is needed for each sill.
  • Cut-outs. For a reveal 30 UAH per side, for a grille 50 UAH, nose trimming 80 UAH per metre, by template 40 UAH per side.
  • Installation. Measuring and turnkey installation in Kyiv and the region from 600 UAH per metre.

Why a metre of a wide sill costs more

This is not a mark-up but the logic of the material: a wide slab needs more raw material, and at a width of 500–600 mm the sill is made with two noses (what that is). So the price per linear metre rises in steps, not smoothly. The practical conclusion: choose the width you need by measurement (how to calculate), not “with a reserve”.

Example 1. Kitchen: a 1.2 m window, 300 mm wide

SeriesPrice per metre, UAHSill, UAHWith end caps, UAH
Exclusive / Compact2 6073 1283 354
Wermodin Gentas2 2292 6752 901

The difference between the series on this window is 453 UAH. For a kitchen check whether cut-outs for a tap or pipes are needed.

Example 2. Room: a 1.8 m window, 250 mm wide

SeriesPrice per metre, UAHSill, UAHWith end caps, UAH
Exclusive / Compact2 3394 2104 436
Wermodin Gentas2 0793 7423 968

The difference: 468 UAH. In a room the sill is more visible than in a kitchen, so the choice of series is more often about looks than about price.

Example 3. Balcony: a 3 m window, 200 mm wide

SeriesPrice per metre, UAHSill, UAHWith end caps, UAH
Exclusive / Compact2 0446 1326 358
Wermodin Gentas1 7375 2115 437

On long windows the difference between the series is more noticeable: 921 UAH. If the window is longer than the blank, the sill is joined: ask the manager whether a connector is needed.

A whole flat: an estimate for three windows

We add the three windows (6 metres of sill in all) into one estimate:

What we countExclusive / Compact, UAHWermodin Gentas, UAH
Sills and end caps (3 pairs)14 14812 306
Installation (6 m × 600 UAH)3 6003 600
Total with installation17 74815 906

The saving over the whole flat with Wermodin Gentas: 1 842 UAH. This is an illustrative calculation: the manager confirms the final amount.

For site managers and designers
  • In the estimate list separately: the sill (linear metres per width), end caps (a pair per piece), a connector for lengths above the standard blank, cut-outs by schedule, installation.
  • No extra allowance for fitting is needed: the sill is cut exactly to the ordered length.
  • If a client approves several options, count both series in one table as above: it persuades faster than talking it through.

What is not in the price

  • Delivery. Kyiv — free from 10,000 UAH; Ukraine — free from 20,000 UAH. If the amount is below the threshold, the manager will state the delivery cost when confirming the order.
  • Installation. Ordered separately: measuring and installation.
  • Installation materials. Mounting foam, sealant, support pads (more in the article “Installing a windowsill”).

How to save without losing quality

  1. An exact width. Calculate the width by the formula “depth of the opening + overhang 30–50 mm + entry under the frame” and do not take “with a reserve”: every 50 mm shows in the price.
  2. Compare the series. If the price matters, look at Wermodin Gentas: a Turkish line with a premium look.
  3. Order everything at once. If there are several windows, one order may reach the free delivery threshold.
  4. Plan the cut-outs in advance. Correcting a sill on site costs more than ordering the right one at once.
  5. Do not save on supports and sealant. It is pennies compared with redoing the job.

Frequently asked questions

Why does a metre of a wide sill cost noticeably more?

The price of a metre grows with the width steps: a wide sill needs more material, and widths from 500 mm are made with two noses.

Is cutting to length included in the price?

Yes, cutting to the needed length is included in the price per linear metre. Cut-outs (reveal, grille, template) and nose trimming are paid separately.

How do I get an exact calculation?

Use the calculator: it takes the width, decor, length and quantity into account, and a manager will confirm the total.

Can I buy a sill without installation?

Yes. Installation is a separate service. If you install the sill yourself, see the guide “Installing a windowsill”.